VINKELKONTAKTKULLAGER SKF

SKF single row angular contact ball bearings can accommodate axial loads in only one direction.
This type of layer is usually applied to another layer.
The bearing rings have a high and a low shoulder and the bearings are self-aligning.

Single row angular contact ball bearings can withstand radial and axial loads acting simultaneously, where the axial load only acts in one direction. They can operate at high speeds and, depending on the variant, even at very high speeds. They are more suitable than deep groove ball bearings for withstanding large axial forces acting in one direction.

• Can withstand relatively high radial loads and large unilateral axial loads
• Can transfer combined loads
• High load capacity
• High rates
• Fast accelerations and decelerations